From :
Address :
Telephone :

Dimensions >>
Diameter :		Width :
Arbor hole :		Profile : (*)	(indicate acc.ISO)
Shape : (*)
Diameter of recess :
Depth of recess F :
Depth of recess :

Grinding Method >>
	Off Hand	In-Feed by Hand	Automatic Grinding
	Stock to remove :	mm	Rough Grinding Cylindrical Grinding Surface Grinding Profile Grinding Tool Grinding Cut-Off Grinding
	Infeed Rate :	mm/min

Material >>
Condition :
Hardness :

Work Piece >>
	Size of surface to be Ground :

Desired Surface >>
	Rough Medium Fine	Rz Rt Ra CLA	mm

Machine >>
Make :		Dry Grinding	Wet Grinding
Type of coolant :
Wheel Speed :	m/s	rpm
Work piece speed :	m/s	rpm

Make Of Wheel Used Until >>
Manufacturer :		Type Of Abrasive :
Grain Size :		Grade :
Structure :		Bond :
Was the grinding result satisfactory ?		Yes	No
If No, What should be Improved ?

Grain Size :	Finer	Coarser
Grade :	Softer	Harder
Structure :	More Open	Denser

Grain Size	6 8 10 12 14 16 20 24 30 36 46 54 60 70 80 90 100 120 150 180 220 240 280 320 400 500 600	Grade	A B C D E F G H I J K L M N O P Q R T U V W X Y Z
Grain size Details Are As Follows : Rough 6 8 10 12 14 16 20 24 Medium 30 36 54 60 Fine 70 80 90 100 120 150 180 Very fine 220 240 280 320 400 500 600		Grade Details Are As Follows : Extremely Soft A B C D Very Soft E F G Soft H I J K Medium L M N O Hard P Q R S Extreme Hard X Y Z